Product features:

1.Intelligent control solder paste first in first out, using PLC intelligent touch screen control system.

2.Each tin paste tank has its own time control.Set the time and the tin can will be automatically fixed by the cylinder,
The solder paste can will be loosened automatically after the solder paste is warmed.

3.Solder paste cans of different specifications can be used on the same equipment.

4.30 cans can be warmed at the same time 4/6/8/10/12, each can 500g solder paste, such as more cans can be warmed according to customer requirements Make it to order.

5.Each can has a cylinder that holds the solder paste bottle in place until the time is up.

6.The return temperature machine can be divided into many types of solder paste, red glue return temperature, each type can be divided into a batch of times or multiple gear first in first out.

7.When the time is reached, the device has a prompt automatic alarm, which corresponds to the corresponding arrival time and abnormal operation Hint.

8.When the power supply is disconnected and restarted, it has the corresponding memory function to prevent the solder paste energy that has not been completed before
Continued warming.

9.Add permission requirements for the temperature back time to prevent other personnel from setting it arbitrarily.

10.The device has the basic requirements for security protection.

11.Built in power outage can not be taken out, with the administrator has the right to release all, operator page and administrator The page password can be set freely.

Function Description:

【Language】
Select the Chinese or English interface to switch to advanced, Settings immediately.

【Password】
change The user can change the operation password.

【Alarm time】
Status alert Alarm time ---------- Value [0-200] seconds

【Screensaver time】
None Touch screen sleep time ---- Value [0-200] min 

【Jitter delay】         
Switch signal dejitter time-value [0-99] seconds

【Operation mode】
Manual/automatic mode selection.
Manual mode after placing solder paste requires to press [start] button.

【Reheating time】
Set the time reheating  ---------------------- value [99-59] minutes.

【Failure time】
Beyond this time, failure locke, then take out with password - value [99-59]  minutes.

【Forced extraction】
Select the solder paste number that needs to be "removed immediately" and press [OK] to remove it.