Specification

Model YS100(Model : KJJ-000) 

Applicable PCBL510 x W460mm to L50 x W50mm (Note 1)(Note 2) 

Through-put (Optimum)25,000CPH（0.14sec/CHIP Equivalent） 

Mounting accuracy (Yamaha's standard components)

Absolute accuracy(μ+3σ):+/-0.05mm/CHIP, +/-0.05mm/QFP Repeatability(3σ):+/-0.03mm/CHIP, +/-0.03mm/QFP 

Applicable components0402(Metric base to □45mm components, SOP/SOJ, QFP,connector, PLCC, CSP/BGA, Long connector(W45xL100mm or less) (Note 3)(Note 4)

Height of components which can be mounted : 15mm or less(Note 5) 

Number of component types96 types(Max, 8mm tape reel conversion)(Note 1) 

Power supply3-Phase AC 200/208/220/240/380/400/416V +/-10% 50/60Hz 

Air supply source0.45MPa or more, in clean, dry states 

External dimension (Note 6)L1,665xW1,562(End of cover)xH1,445mm(cover top) L1,665xW1,615(End of guide for feeder carriage)xH1,445m(cover top) 

Weight Approx. 1,630kg(Main unit only) 

(Note 1)It is varied by the combination layout together with sATS / dYTF etc.

(Note 2)For information on "2 stages push-up spec.", please consult us separately.

(Note 3)In case of FNC head type, the applicable components range is □31mm or less Components.

(Note 4)When handling long connectors and large sized components, about the eccentric offset values and the rotation angle, please consult us separately.

(Note 5)4mm or less height of upper face of PCB before transport is required for the FNC head type.

(Note 6)This dimension does not include the projection.