YAMAHA Used Mounter YS88

Home / SMT Equipments / SMT Pick&Place Machine / YAMAHA Used Mounter YS88

Product inquiry

YAMAHA used mounter YS88 cost-performance is very high, as machine woks very stably, lead time is short, vintage is young.

1. With multi camera

2. With fiducial camera

3. With accessories

4. With ATS30 tray

5. All parts is original, without repair

6. Blow station

Option:

1. Tape cutter

2. Touch screen

3. Extended conveyor

4. Nozzle station

5. ESD Ionizer Fan - Ionizing Air Blower bar

6. IT-Option

Usually, YAMAHA second hand machine can meet official accuracy specification, each machine ACP/CPK data can be provided when we complete the acceptance.

Specification

YAMAHA YS88 (MODEL: KJH-000)

Applicable PCB L 510 x W460mm to L50 x W50mm

Trough-put Optimum condition 8,400CPH (0.43 sec/CHIP Equivalent)

Mounting accuracy When using Yamaha's standard components Absolute accuracy (μ + 3σ) +/-0.05mm/Chip, +/-0.03mm/QFP Repeatability (3σ) +/-0.03mm, +/-0.02mm/QFP

Applicable components 0402 (metric base) to 55mm components, SOP/SOJ, QFP connector, PLCC,CSP/BGA Long connector (W45 x L100mm or less)Odd-shaped components (such as special connectors) which requires pressing force control mounting (10 to 30N) Height of components which can be mounted: 25.5mm or lessAllowable height on PCB surface before transport:6.5mm or less

Number of component types 96 types (max, 8mm tape reel conversion)

Power supply 3-Phase AC 200/208/220/240/380/400/416 V +/-10% 50/60Hz Air supply source 0.45MPa or more, in clean, dry states External dimension L 1,665 x W 1,562 (end of cover) x H 1,445mm (cover top)L 1,665 x W 1,615 (end of guide for feeder carriage)xH1,445mm(cover top) Weight Approx. 1,630kg