Specification

Basic features of CP-400 printing press:
The PCB size compatibility range is wide, supporting PCBS of different thicknesses from 50mm X 50mm to 400mm X 340mm.
2. High-precision printing resolution. High positioning accuracy, repeat positioning accuracy ±0.01mm; Printing accuracy: 0.025mm. Supports glue printing.
3. Fully automatic control can enhance production efficiency, control quality and save costs: automatic PCB correction; The scraper pressure is adjustable. "Automatic printing; Automatic steel mesh cleaning (dry cleaning, wet cleaning, two cleaning methods);
4. It adopts the suspended printing head independently developed by Huancheng Company. The pressure of the scraper can be adaptively adjusted to achieve a perfect solder paste forming effect.
5. The multi-functional PCB positioning system makes PCB positioning convenient, fast and accurate.
6. A programmable lifting platform for adjusting PCB thickness.
7. Upper and lower visual positioning system.
8. Built-in image processing system.

The solder paste printing range of the CP-400 printer:
SMT process production and processing of surface mount components such as resistors, capacitors, inductors, diodes, transistors, etc. : 01005, 0201, 0402, 0603, 0805, 1206, and other specifications and sizes;
2. IC: Supports SOP, TSOP, TSSOP, QFN and other packages, with a minimum Pitch of 0.3mm. Supports BGA and CSP packaging, with a minimum Ball diameter of 0.2mm.
3. Printing size: 50mm x 50mm to 400mm x 340mm;
4. PCB specifications: Thickness 0.6mm to 6mm (5), FPC specifications: Thickness 0.6mm to 6mm (fixtures are required for those under 0.6mm)

Application scope of CP-400 printing machine:

Production and manufacturing of products/equipment such as mobile phones, communication devices, LCD TVS, set-top boxes, home theaters, automotive electronics, medical and power equipment, aerospace, etc., and production and processing of general electronic products.

Parameters of CP-400 printing machine:

Repeat positioning accuracy: ±0.01.mm (CPK=2.0, 6σ)
Printing accuracy: ±0.02mm
Production cycle time/excluding cleaning: <7 seconds (Test board 200x150mm)
Cable changing time: less than 5 minutes
Steel mesh size: 470x370mm-737x737mm
PCB printing size: 50x50-400x340mm
PCB curvature: <1% (with the diagonal length as the reference)
Edge clearance of the board: 3mm
Track transmission speed: 100-1500mm/sec programmable control
PCB positioning methods: Elastic side clamping/vacuum suction/Z-direction sheet pressing/magnetic pin/side support block/flexible automatic pin (optional)
Printing head: Programmable electric control printing head (standard)/Programmable electrical combination control printing head (optional)

Scraper speed: 10-200mm/sec
Scraper pressure: 1-15KG program control (standard configuration) (closed-loop pressure feedback optional)
Steel mesh separation speed: 0.01-10mm/sec
Cleaning methods: dry cleaning, wet cleaning, vacuuming (programmable for any combination)
Workbench adjustment range: X=±4mm,Y=±6mm, Θ=±2°
Camera system: CCD camera/telecentric coaxial vision system/Four independent coaxial/annular LED light sources
Air usage: 4-6kg/cm²
Gas consumption: approximately 0.07m³/min
Power supply: AC: 220, ±10%,50/60HZ 1Φ1.5KW
Machine dimensions: 1250mm(W)x1450(D)x1510(H)
Machine weight: Approx:1100kgs

Configuration of CP-400 printing press:
Programmable direct-coupled electrically controlled scraper pressure automatic adjustment suspended scraper printing head.
(1) Programmable electric pressure automatic adjustment system. The pressure control is accurate.
(2) The pressure of the front and rear scrapers is independently adjusted to ensure that the pressure imbalance caused by the fatigue deformation of the scraper material is avoided, thereby preventing the difference in printing between the front and rear.
2. Standard stainless steel scraper, with a unique design, extends the service life of the blade.
3. Visual alignment system.
4. Platform X/Y/θ automatic correction system.
5. PCB clamping and support device.
-Magnetic pin;
-The flexible clamping device on the side of the PCB ensures that the PCB will not bend or deform during clamping.
-Automatically adjust the lifting platform;
-Flexible automatic ejector pin (optional);
6. The numerical control guide rails adjust the transportation width and speed.
7. Two programmable and freely combinable steel mesh cleaning systems: dry and wet.
9. Industrial control computer,Windows XP Chinese-English interface operating system.
10. Built-in software diagnostic system.
11. Standard SMEMA connection interface.