1. Human-computer interaction system: 3.5-inch capacitive touch screen
2. Hardware control: independently developed single-chip microcomputer
3. Software control system: Independently developed based on ARM (STM32)
4. Feed speed is adjustable
5. Feed position adjustment: X direction limit component adjustment, Y direction software compensating regulation
6. Communication method: None
7. Supply voltage: 24V
8. Motor: Use Japan Shino motor, model 42PG010-D20-0448
9. Induction mode: optical fiber induction material head
10. Fixing method: guide groove and positioning pin
11. Application: YG12 YS12 YS24 YS100 YS88 YS24X YSM10 YSM20 YSM20R YRM10, SS & ZS type feeder trolley.

Material arrangement and bottom film related instructions:

1. Applicable materials: push-roll feeder is suitable for paper labels, protective film, foam, double-sided tape, conductive adhesive, copper foil, steel sheet, reinforcing plate and other roll material to achieve automatic stripping feed

2. The distance between the front and back of the material and the left and right sides is 2-3mm

3. Reserve a blank area of about 5mm on both sides of the material belt

4. The best thickness of the bottom film: 0.05mm (die cutting without cutting the bottom film)

5. Bottom film effect: milky PET film is the best, transparent PET film is general, blue PET film is less effective

6. Application: YG12 YG12F YS12 YS12P YS12F YS24 YS24X YS100 YS88